Accelerometer Mounting Pads Manufacturers

Accelerometer Mounting Pads are used for glue (epoxy) mounting accelerometers to a prepared surface. The mounting pads are stainless steel and are 1″ (2.54 cm) in diameter & either 1/4″ (0.64 cm) or 3/8″ (0.95 cm) thick. The pads are lapped on one side to provide an ideal surface for accelerometer mounting. The pads are also provided with a 1/4″ x 28 UNF tapped hole for accelerometer mounting. The 1/4″ thick version is recommended for low clearance installations or when using the combination epoxy & stud mounting method. The 3/8″ thick version is recommended for installing ring mode accelerometers.