Angular Contact Ball Bearings Manufacturers

Angular Contact Ball Bearings are designed to take radial and thrust loads where the thrust component may be large. Their axial stiffness and small operating clearances provide precise position accuracy for the shaft. These are produced typically with an angle of 40 degrees. It supports a heavy thrust load in one direction. These bearings are mounted single or when the sides are flush ground in tandem for constant thrust in one direction. It is also mounted in pairs when the sides are flush ground for a combined load either face-to-face or back-to-back. They are used in machine tool spindles, which help to retain the preload at higher speeds. They are mainly used in centrifugal applications to support axial loads or a combination of both axial and radial loads.