Profile: CB Power and Industrial Equipment specializes in designing, building and installing industrial dampers & expansion joints exactly to the specifications. We design and manufacture pivot-type diverter dampers for the thermal and mechanical challenge of natural gas turbine outlet applications that often exceed 1200 F applications. For large rectangular stack inlet dampers, blade configurations are designed to meet the needs for flow control of the application. Our Effox Flextor stack dampers are designed with a unique pressure relief system which allows for the opening of the non-driven blades when pressure build-up occurs. Its heavy-duty design ensures that the shafts are steady & the blades do not flutter or chatter, and linkages smoothly move the damper blades with minimum resistance. Our actuator motorization options can be electric for smooth ramp-up and ramp-down, or pneumatic for rapid opening & closing. Our heavy duty guillotine dampers are the mainstay of process air and gas moving duct systems. Guillotine dampers are used when tight shut-off is required to isolate certain sections of a flue gas or duct system. We supply mansafe guillotine dampers in ducting sizes as large as 25' high by 16' wide. Our zero-leakage designs have been air tested as high as 3 PSI and hydro tested at 60 PSI for structural integrity. We can provide open-bonnet, enclosed bonnet, and 100% isolation with seal-air fans. Every guillotine damper comes with the proven and robust FlexRak™ rack & pinion design. Our guillotine dampers deliver one of the most reliable, gas-tight shut-offs in the market. These dampers are designed to be shipped in compact modules. Our dampers are fully assembled and pre-tested in our ISO 9001 facility. Then they are disassembled and match-marked for shipping & ease in reassembly. We can also custom engineer dampers and expansion joints to all sectors of industry.