T-Lockout Valve is used for isolating supply lines during maintenance and servicing. These are available with aluminum body, spool, T-handle & silencer, stainless steel detent spring and nitrile seals. The operating temperature of this valve is from -30°C to +80°C.
T-Seals are used in applications where large clearances occur as a result of the expansion of the thin-walled hydraulic cylinder. The T-ring is installed under radial compression and provides a positive seal at zero or low pressure. T-seals are effective at avoiding problems commonly encountered with o-ring seals, such as the tendency of o-ring seals to twist when used for reciprocating service. T-seals are three-piece sealing systems that involve an elastomeric. These T-seals are two tubes sealed together at right angles. The T-seals allow for lateral motion and thermal expansion differences between the RCC and the orbiter wing. T-seals also prevent extrusion in high-pressure/high-clearance systems. T-Seals are available for use in industrial hydraulic systems and in thin flange styles.