Swivel Head Pin Vise is used for holding drill bits, reamers, needle files, screws, taps and wires. The vises with freewheeling head are used for drilling and tapping. It has nickel-plated steel with two double-ended collets one in screw chuck and the other stored in handle. The double-ended collets have the capacity of .0 to .187 in. or .0 to 3.2mm.
Swivel hoist rings are often used for applications where additional movement of the hoist ring is needed. These hoist rings are safer than most other lifting devices and work equally well for top and side mounting. These swivel hoist rings maintain their load capacity when loads are at various angles. Swivel hoist rings are mounted with a single center mounted socket-head cap screw. With this style of hoist ring both the mounting base and lifting ring are free to move. Here the lifting ring can pivot 180 degrees and the complete unit can rotate 360 degrees about the mounting screw. The more commonly used units are capable of lifting loads ranging between 650 and 10,000 lbs.