(2 suppliers)
(1 supplier)
(1 supplier)
(1 supplier)
(1 supplier)
(11 suppliers)
(1 supplier)
(1 supplier)
(1 supplier)
(1 supplier)
(1 supplier)
(1 supplier)
(1 supplier)
(1 supplier)
High Temperature Accelerometer Extension Cables are designed to work with all accelerometers using a 2-pin MIL spec 5015 connector. The cables utilize an environmental designed MIL spec. These cables include connector with a positive seal "0″ ring that mates with the MIL-C-5015 connector found on most accelerometers. These cables features shielded, twisted, 20 AWG Teflon® cable, temperature rated to 392º F / 200º C and water tight connector backshell. The cable is well suited to handle temperatures associated with installation near steam piping & manifolds.
(4 suppliers)
(2 suppliers)
(15 suppliers)
High temperature adhesive depends on the needs of the design engineer at the time. The first structural adhesives used in aircraft were satisfactory for those times, but the need for adhesives to sustain faster aircraft designs. It has generally taken a different direction than for the other types of structural adhesives.
(9 suppliers)
(2 suppliers)
(1 supplier)
(1 supplier)
(1 supplier)
(8 suppliers)
(2 suppliers)
(3 suppliers)
(3 suppliers)
(5 suppliers)
(2 suppliers)
(1 supplier)
(1 supplier)
(10 suppliers)
High temperature bearing is a device to allow constrained relative motion between two parts, typically rotation or linear movement. It is classified broadly according to the motions they allow and according to their principle of operation. It is idealy suitable for high temperature applications.
(0 suppliers)
(1 supplier)
(3 suppliers)
(1 supplier)
(1 supplier)
(1 supplier)
(2 suppliers)
(7 suppliers)
(1 supplier)
(1 supplier)
(4 suppliers)
(2 suppliers)
(4 suppliers)
(11 suppliers)
(48 suppliers)
High temperature cable is designed for a wide range of internal and external wiring applications where excellent mechanical and electrical performance is required in high temperature (300°C to 1000°C). It consists of a conductor which is solid or stranded, nickel coated copper or pure nickel, as required to meet the temperature requirements of the application and also it consists of insulations including polyamide tapes, mica tapes, glass fiber braids, ceramic braids and combinations of these materials are selected to meet temperature and voltage application requirements.
(1 supplier)
(2 suppliers)
(1 supplier)
(3 suppliers)