Rotary Shearing Machine is ideally suited for cutting/shearing circles, segments, strips of unlimited length, ring shearing, contour shearing, blanking, flanging & beading operations, shearing of cutouts and shearing of notches. Rotary shears can shear circles with high accuracies of +/- 0.05 mm and used for production of stator & rotor stampings with additional accessories like ball screws & PLC controls. The constriction of rotary shearing machine consists a bed, a cutter holder frame, a sheet holder frame and mechanical & hydraulic drive units.

Rotary Shears are used in the process of recycling plastics for converting scraps into particles of required size. Rotary shears are low speed devices characterized by two counter rotating shafts. The shafts rotate at different speeds. The size reduction involves a shearing or tearing action rather than the impact or crushing reduction. More than one pair of shredding shafts is mounted at the bottom of a simple, rectangular feed hopper. They are particularly well suited for the processing of pallets, drums, automobile tires and furniture where coarse size reduction is required. Due to their low speed and open construction, they are not prone to explosion. In comparison with the hammer mills, they are low noise and low potential dust device. They are not applicable to produce particles of small or controlled size.

Rotary slip is a circular wedge-shaped device made of steel with teeth or other gripping devices that fits into the slip bowl of a rotary table. Rotary slip is designed to hold the string of drill pipe in the well when it is not suspended from the traveling block and hook or elevators. This slip is made with three or more segments of cast iron honeycomb that is hinged to fit around the pipe. The outer diameter of the rotary slip has an inward angle of about 9.5°. The inner surface has a set of jaws for biting the pipe.

Rotary soot blower is used to clean convection surfaces of boiler tubes, economizers or tubular reheaters of field erected or packaged industrial boilers. It is suited for environments with temperatures up to 800° C. It is supplied with either a mass blowing or lane blowing arrangement.