(2 suppliers)
(4 suppliers)
(1 supplier)
(3 suppliers)
(1 supplier)
(9 suppliers)
(1 supplier)
(1 supplier)
(1 supplier)
(2 suppliers)
(1 supplier)
(2 suppliers)
(1 supplier)
(1 supplier)
(1 supplier)
(44 suppliers)
(21 suppliers)
(1 supplier)
(3 suppliers)
(4 suppliers)
(1 supplier)
(1 supplier)
(3 suppliers)
(13 suppliers)
(91 suppliers)
(2 suppliers)
(1 supplier)
(33 suppliers)
(3 suppliers)
(1 supplier)
(5 suppliers)
(1 supplier)
(38 suppliers)
(4 suppliers)
Rubber-flapper swing check valve contains a ductile-iron body and a cover. The body has a long pattern design with integrally cast-on end flanges. It is used for raw sewage, corrosive waste, sump and pump discharge areas.
(2 suppliers)
(7 suppliers)
(1 supplier)
(1 supplier)
(1 supplier)
(1 supplier)
(61 suppliers)
Rubber flooring is composed of natural or synthetic rubber. The most common size is 1/8 inch in 9 by 9 or 12 by 12 inch squares. It is also available in 3/32, ¼ and ½-inch thicknesses and sheet form. The thicker material is used for high traffic areas, such as runners, landings, and in interlocking tile for industrial applications. Solid and linked rubber matting of various designs and thicknesses are also available. Ordinary 1/8-inch rubber tile is available in solid, marbleized and other mixed colors and embossed designs. Rubber flooring is resilient, quiet and comfortable underfoot, can withstand concentrated static loads over 150 pounds per square inch, is durable and easily maintained.
(16 suppliers)
(1 supplier)
(2 suppliers)
(1 supplier)
(3 suppliers)
(1 supplier)
(1 supplier)
(284 suppliers)
The rubber gasket is vulcanized and made to fit the segment precisely. The two opposing gaskets in the joint will be compressed sufficiently so that water leakage through the joint is prevented. The gasket recess and the size and geometry of the gasket are designed to meet the leakage requirements, even if the segments are joined out of tolerance. These are normally full face for flat-faced flanges. They are easily made in the field by tapping a hammer on a sheet of rubber laid over the flange, around the flange profile and holes.
(1 supplier)