Hydra-Lift Drum Rotators is designed to lift and roll closed drum to mix and blend the contents. It provides drum handling and mixing. The ergonomic design allows to load an upright drum at floor level. We can control the hydraulic tilt to lift an upright drum to place the drum on the rotator wheels and start and stop the drum rotation with a second control & roll drums at 5 to 20 RPM until contents are mixed as desired. Then return the drum to vertical to unload.
Hydramotor valves are designed for main line gas control. These valves typically operate from a single contact on-off type limit control to provide tight shut-off of dry natural, mixed, manufactured or LP gases. It consists primarily of two components: the actuator and the valve. Actuator is easily rotatable for best positioning of damper and electrical terminals. The valve is a globe type, 2-way normally closed, die-cast body and bonnet with a soft synthetic seat disc.