Averaging Pilot Tube is designed to meter high velocity flow with simplified installation. Averaging pitot tubes are used for flow measurement of liquids, gases and steam in circular or rectangular pipes or ducts.

Aviation Angle Drill is a small angle head design for close-quarter drilling operations. It has rear exhaust and 90 degree angle head.

Aviation Caliper consists of fully hardened, tempered joints, springs and washers. It is having size of 6″ maximum size and has fully rounded caliper ends. Spring Divider Caliper meets federal specs with high carbon steel legs and is heat treated.

Aviation fuel is a specialized type of petroleum-based fuel used to power aircraft. It is used in less critical applications such as heating or road transport and often contains additives to reduce the risk of icing or explosion due to high temperatures, amongst other properties. Most aviation fuel available for aircraft are kinds of gasoline used in engines with spark plugs i.e. piston engines and wankel rotaries or fuel for jet turbine engines, which is also, used in diesel aircraft engines. These fuels are classified into two groups, aviation gasoline (Avgas) and aviation turbine fuels (Jet fuel). Avgas is an aviation gasoline that is suitable for use in aircraft that have piston engines. Jet fuel is an aviation turbine fuel suitable for use in aircraft with turbine engines.

Aviation lubricant is a technically advanced blend of synthetic and mineral-based oils. It is formulated with a proprietary additive package to control wear and is especially suitable for recreational aircraft thus susceptible to build-up of rust and corrosion. These lubricants use gas turbines in jet aircraft, followed by aviation piston engine oils. It is designed to be used with premium single and multi-viscosity engine oils and the highest quality greases & hydraulic fluids.

Aviation Microstop Countersinks are high speed series countersinks and have ball bearings supporting the spindle. These can be fitted with other skirt styles. It also has wrench flats on spindle to aid in cutter removal. These are hardened and ground precision spindle.