Gas Pulsation Dampeners eliminate the harmful pulsations with minimal pressure loss and power consumption. Pulsation dampeners are used to control and minimize the pulsations that result from a pressurized systems stroking action. Pulsation dampeners use a bladder or bellows to separate the process fluid from a compressible gas.

Gas purifiers are used to reduce the levels of contaminants, enhance the purity of lower grade helium, and help insure instrument stability, reproducibility & lower maintenance costs. It reduces gas impurities from high PPM to low PPB levels. It decreases baseline noise and increases GC/MS sensitivity. These purifiers have designed to be placed in-line with the detector gas supply to remove various contaminants from the analytical gases.

Gas purity tester is an absorption bottle designed to eliminate confusing cocks, hose connections, awkward manipulation and usual caustic spillage. It consists of caustic reservoir and calibrated absorption burette mounted to a PVC polished frame. The reservoir and burette are held to the frame with two neoprene covered mounting bands that are adjustable from the rear side of the frame. The caustic reservoir has a line indicating the level to which caustic solution should be added, which volume is slightly in excess of the capacity of the absorption burette. The line drawings are used for identification of the purity tester parts.

Drilling landfill gas well is a necessary process for recovery and control of the gas produced by the decomposition process. Placing the wells typically requires puncturing the landfill cap, then excavating a hole 24 to 36 inches in diameter down 40 to 140 feet. Large quantities of landfill gas such as methane, carbon dioxide and traces of oxygen, hydrogen sulfide and nitrogen may escape into the surrounding environment during drilling and may continue until the well is capped. A proper-fitting gas recovery system can box-in drilling hazards at landfills.

Gas regulator is the device that controls the amount and pressure of the gas that is used for combustion in the gas heating system. In the case of liquid propane gas, the regulator is in the line between the tank and the gas valve. In the case of natural gas, the regulator is located on the gas valve. This is one quick way for the heating professional to determine, which type of fuel is being used.

Gas Sample Conditioning System comprises a probe device, gas conditioning device and an analyzer device. The task of a gas sample conditioning system is the removal of particulates, coalescable liquids and water without loss of analyte gases.

Gas sampler probes are designed for continuous extraction of gas from a process or exhaust stream. It is designed to be connected to a two-tube or three-tube heated sample umbilical and includes a strain relief grommet. The probe includes an in-situ sintered metal filter, which excludes particulate matter, as the gas sample is withdrawn from the stream. The probes are based on a sample chamber with a moveable piston and a motor-actuated valve. Measurements of the concentrations are made using commercial gas analysis instruments and three types of gas-sampling probes. The probe types are tubular inlet probe, a quick-quench probe, and a dilution probe. Gas samplers are designed to retrieve uncontaminated samples of well fluids comprising or containing gas, by maintaining the original well pressures.

Gas Samplers are used to take samples of media from process streams, reactors or storage vessels. A gas sampler is used to determine the quality of a flowing stream and available in two configurations such as six-port and single-valve, three-way. Gas samplers provide safe methods for gas sampling. It is used in product purification, chromatography and to detect presence of carbon in water.

Gas Scrubber are used to remove small particles and undesirable gases from industrial exhaust gases for the primary purpose of reducing environmental pollution. They are usually installed after the mechanical cyclone collectors, which are efficient for removing particles larger than 1-5 micrometer. Gas scrubbers generally operate counter-currently with the scrubbing liquor distributed over the packing from the top of the tower.