Conveyor Parts Washer is used for rinsing, air-knife blow-off and drying applications. This system is offered with sensor and fault indicator and touch-screen interface. Tanks and process chambers are fabricated through stainless steel that allows flow-through washer to be used with aqueous spray cleaning chemistries without corrosion. It has stainless mesh belt, from 16 to 24 in.

Conveyor roller deck automated guided vehicle is used for handling of pallets and racks to and from conveyors. On the conveyor deck vehicle, there is a variable speed drive, which operates rollers to smoothly transfer the load onto or off of a conveyor. The speed of the rollers is synchronized with the conveyor and sensors on the bed ensure smooth and proper positioning of the load. The dimensions of the conveyor deck vehicle vary with the load weight and dimensions.

Conveyor Roller Zones begin with a 2-foot section of mini-rollers that are integrated into the conveyor and flush to the belt height. The items that arrive at the end of the conveyor will coast off the belt and come to a rest on a 2-foot section of mini-rollers. It can be fatiguing to load a belt that is still running.

Weighing scales are used to check the weight of the product before or after filling. The weight of the empty or filled packages can be measured during transport using conveyor scales. Conveyor scales can weigh large containers such as barrels during filling. A variation of the small package conveyor scales also has the possibility of sorting packages according to their weight, conducting them to different conveyors, after weighing. These are often a part of complex packaging equipment. It should be installed where it will not be subjected to conveyor influence that causes a lifting effect of the belt off the weigh platform.