Fire Hose Testers has flow rates up to 10 GPM, and pressures up to 1,000-PSI Electric, and diesel driven models designed to test fire hose up to 6″ in diameter. It is mounted on swivel casters. This is equipped with GFI for safe.

Fire hydrant meter is fitted for a fire hydrant connection and is designed to measure flows from 35 gpm up. The pressure drop through the meter is approximately one pound per square inch at 200 gallons per minute. The body is constructed of cast aluminum alloy, with a stainless steel liner. The propeller is made of polyethylene plastic and all other wetted parts are made of bronze or stainless steel materials.

Fire Nozzle Pistol Grip Adapters is made from 6061 T-6 aluminum bar, corrosion resistant hard coated. It has full-time ball bearing swivel base. It is easily affordable, even for the smallest volunteer or forestry units. Heat treated aluminum construction is used for minimum weight.

Fire Nozzle Tips has a 1 1/2″ Finlet. It has a smooth tapered bore with a protective counterbore that delivers more reach and penetration even at low pressure. It features include standard 1/2″ orifice, type- double stacked handline, hose size- 1-3/4″, 2″.

Fire protection butterfly valve has a ductile iron body and disc with EPDM disc coating. This valve features a weatherproof actuator housing approved for either indoor or outdoor use. It is available in sizes range from 2 1/2″ to 12″. Its ductile-iron body is coated with a heat-fused polyphenylene sulfide blend.

Fire protection cover consists of firm frame for installation into construction structure and hinged cover. The cover frame is welded from thin-wall profiles. Its upper board is made from steel sheet with anti-slip patterns. The lower board is made from smooth steel sheet. The space between the upper and bottom boards is filled with insulating material. The easy opening of the cover is possible by means of gas strut. The gas strut is installed between the frame and the hinged cover. Its stroke length is adjusted with distance chain. The fire-protection tape is stuck on the cover's peripheral edges.