Hand bender is designed for bending bars with diameter below 5mm. It does not need any electric motor and engine to run. Bars can be bend by changing different sizes by fulcrum rollers. It is used for tubing and semi-rigid cable. Each hand tool is machined from stainless steel.
Hand Cape Chisels is used for cutting or grooving keyholes or slots. It is used for crisping lines, joining corners, or slotting stone. It cuts narrow and deep. Carbide tip is flared to prevent it getting stuck in the groove. It is also very useful in removing mortar in preparation for repointing masonry buildings. It has highest quality carbide blade lasts and lasts. It has unique chisel has a tip that is turned 90 degrees against the rest of the blade, which helps prevent it from getting stuck. It is useful in slotting, crisping and getting into tight places. It has handy for removing mortar from between bricks and stone quickly and accurately. It is specified for purpose of many architects.
Hand Chain Hoists have high mechanical efficiencies (65% to 80%) and mechanical advantages of approximately 22:1 (for low-capacity units). The hand chain is endless and runs over a sheave, which in turn actuates a mechanism composed of triple gears enclosed in a gearbox.