Pilot Operated Solenoid Valves is designed for aggressive or ultra pure chemicals. It provides outstanding flow and pressure capacity. Its two way solenoid valves cover the most industrial laboratory application. It controls the flow of fluid sthrough the single passage. It has twp ports an inlet and an outlet. It features includes bubble-tight design, no metal parts in wetted area, rugged thermoplastic construction, patented fail dry vented design, resistant to atmospheric corrosion, uses line pressure to assist operation which allows extremely high CV performance and outstanding pressure ratings. It has molded corrosion-resistant coil assembly. All valves are individually inspected and 100% tested. Optional coil connector light indicates when valve is energized.

Pilot operated valves are used for intermittent tubing flow production. These valves consist of a pilot section and a power section. These valves are used where a flow producing a minimum pressure drop is always present in a system or in systems where the valves full flow capacity is not required under low flow conditions.

Pilot Production Furnaces provide high yields, maximum energy efficiency and uniform quality, in a wide range of applications. The temperature range is 1100°C. These are featured with ceramic fiber heating/insulation modules, precision control of belt speed, temperature and atmosphere and continuous monitoring. They are used in firing ceramics, glass and thick film and also in air hardening, soldering and brazing works. They have 600-muffle alloy and the belt speed ratio is 1:10.

Pilot torch is an atmospheric pilot with a soft, stable flame designed to operate on low-pressure gasses. The basic components are the AN tip, SPI inspirator, a length of mixing tube and a control valve. This is used to ignite the oil from the main oil guns. It is used when placing a main oil gun in or taking a main gun out of service and to assist in burning any oil scavenged from the main oil gun during the steam purge cycle.

Pilot valve is a dead mans switch, which requires a human operator to hold it in the mid-position and take some action if the operator takes off pressure or applies full pressure. Pilot valves are used for unloading and for intermittent gas lift operation.