Cathodic protection cable is a stranded copper conductor insulated with a high molecular weight polyethylene compound that provides excellent abrasion, crush, chemical, oil, and moisture resistance. It is designed for use in cathodic systems to protect against galvanic and electrolytic corrosion of underground or submerged metallic objects. It is also designed to provide protection by acting as a DC feeder cable to electrically charged metallic structures. It is suitable for direct burial and cold temperature applications.

The calibration test fixtures are used to hold all of the diagnostic system components during calibration. It has a raised test tube holder, supported by four small Teflon posts. This holder is used during the calibration process, to hold the test tubes with the activated capsule, and the pH calibration solutions. The fixture is made of an opaque acrylic material. It is attached to the test fixture base plate is a clear plexi-glass block with 6 holes in it, which hold the test tubes, used for calibrating the ph capsule.

CAM operated rotary switches are defined as set of contacts arranged to make and break in a sequential fashion by which the connected outputs will close and open the circuits. The main areas of operation are in making & breaking & isolating power circuits and switching of auxiliary circuits. The CAM which does the function of closing and opening of the switch, have multiple positions (rotary movement) which allows multiple circuit functions controlled through single operations. These switches are suitable for AC as well as DC applications. The number of positions and the switching angles are flexible and will offer the user a choice to decide based on the requirement.

Cam Ring includes a cam groove, which is open at one end. Cam ring reduces fluid-borne noise to at least the level of a fixed pump. The cam ring used on radial engines has several cam lobes on its outer surface.

Automatic capacitor banks are used for central power factor correction at main and group distribution boards. Power factor correction means that reactive power charges levied by electricity suppliers can be avoided. It consists of stages controlled by a power factor controller, which ensures that the required capacitor power is always connected to the system. In automatic capacitor banks all components (capacitor units, contactors and fuses) are built into a compact steel enclosure. This makes installation easy and capacitor banks can also be easily expanded if necessary.

Fixed capacitor banks correct poor power factor, increase load capacity, and regulate voltage throughout the electric distribution systems. It features multiple capacitor cells assembled in a single enclosure. Each dry capacitor cell features dielectric fill (self-healing metallized polypropylene) as well as discharge resistors for safety. These are designed for applications that do not contain harmonic generating loads.

The capacitor structures consist of a first electrode, capacitor dielectric and top electrode. It is formed on a passivation layer overlying the interconnect metallizations. The capacitor electrodes are interconnected to the underlying integrated circuit from underneath; through conductive vias to the underlying interconnect metallizations. The method provides for adding capacitors to an otherwise completed and passivated integrated circuit. The structure is particularly applicable for ferroelectric capacitors. The passivation layer acts as a barrier layer for a ferroelectric dielectric.

Capacitive proximity switches sense conductive and non-conductive material. It contains an oscillator. The oscillator circuit produces an electro static field. They are ideally suited for liquid level control and for sensing powered and granulated materials. For best operation, they should be used in an environment with relatively constant temperature and humidity. Capacitive proximity switches can be used to detect objects when they are typically between 4 and 60 mm from the sensor head.

Carbon Brush is made of a softer material and designed to replace easily without dismantling the machine. Carbon brushes are movably supported in brush supports relative to the outer circumferential periphery of the collector.

Card Cages are metal frames that support and contain electronic components and power supplies. They include a backplane with slots for installing expansion boards, a power supply, cooling fans and connectors. It supports active and passive backplanes of a specific bus type. It includes multi-system extension interface (MXI), embedded technology extended (ETX), embedded PCI extended (ePCI-X), advanced telecommunication computing architecture (AdvancedTCA) and host media processing (HMP).

Cartesian robots are capable of moving in multiple linear directions. Cartesian robot arm configuration has three linear and no rotational axes. It is suited for operations that require essentially up-and-down motions, as in palletizing or machine tending for which precise positioning is required. They are often used for pick-and-place applications, machine tool loading, and stacking parts into bins. Other applications include the manufacture of starter motors, wiper motors, instrument clusters, electronic fuel injection systems for cars, as well as cell phones, pressure sensors, printed circuit boards, and navigational systems.