Skype

Fluid Bed Dryers Suppliers

Fluidized bed technology is widely used in the pharmaceutical industry for drying, granulating, and coating. Fluid bed dryer comprises of a top fluidizing chamber & a bottom air distribution chamber separated by a specially designed perforated plate. A fluid bed dryer significantly reduces drying time compared with a tray dryer or vacuum dryer. It exposes the entire product surface area to the high-volume air stream and heat is transferred to the product surface by convection. However, if the inlet air velocity is not properly selected, consistent and uniform drying will not be obtained. The feed of wet materials is dried by intimate contact with hot air when the material is in a fluidized state. A vibrating mechanism can be attached to give a forward motion cum agitation to the product at a controlled rate. Uniform processing conditions are achieved by passing a gas (usually air) through a product layer under controlled velocity conditions to create a fluidized state. Examples of fluid bed dryer designs are two-tier dryer for polymer, four-stage dryer for organic product and three-stage dryer for bulk chemicals. This can be applied in mile powder, detergents, lactose, agglomerated powders, cheese powder, fruit pellets and salt.
Limit companies to: Worldwide  USA  UK  India
 EMAIL INQUIRY to  1 to 20 of 79 suppliers  Page: [1] 2 3 4 >> Next 20 Results
Shiv Shakti Process Equipment P. Ltd. | Address: 407, Shivam Chambers,S V Road, Goreagon West,, Mumbai, Maharashtra 400104, India India
www.shivshaktiequipments.com | Send Inquiry | Phone: +91-(0)-8291900674
Shiv Shakti Process Equipment P. Ltd. manufacturing & exporting of Process Equipments and Engineering Systems for Pharmaceutical, Bulk Drugs, Chemical, & Allied Industries. We are an ISO 9001:2008 more...
Octagonal Blender | Fluid Bed Dryers | Manual Top Discharge Type Centrifuge
 
Aadvanced Machinery, Inc. | Address: 35044 Automation Drive, Clinton Township, Michigan 48035, USA USA
www.aadvancedmach.com | Send Inquiry | Phone: +1-(586)-790-1717
Aadvanced Machinery, Inc. specializes in supplying new and used equipment to the powder process & chemical industries. Our in-stock inventory includes presses, pug mills, piston extruders, mixers, ble more...
H & P Equipment Co., Inc. | Address: 14 Skyline Drive, P.O. Box 839, Montville, New Jersey 07045, USA USA
www.hpequip.com | Send Inquiry | Phone: +1-(973)-335-9770
H & P Equipment Co., Inc. buys and sells all types of equipment used in the manufacturing of liquids or powders for chemical, pharmaceutical, bio-tech, food, plastic, paint, specialty chemicals, preci more...
DMC Industries, Inc | Address: 165 Orville Drive - Suite B, Bohemia, New York 11716, USA USA
www.dmcindustries.com | Send Inquiry | Phone: +1-(631)-588-9393
DMC Industries, Inc specializes in the processing & packaging equipment. Our product includes accumulating, feed and rotary tables, blister machines, bottle unscrambles, desiccant inserters, feeders & more...
Airdusco Engineering & Design Services, LLC. | Address: 4739 S. Mendenhall Rd, Memphis, Tennessee 38141, USA USA
www.Airdusco.com | Send Inquiry | Phone: +1-(901)-362-6610
Airdusco Engineering & Design Services, LLC. is a full service manufacturer and application engineering company. We specializes in the design & sales of bulk solids handling, dust collection and explo more...
Aaron Equipment Company | Address: 735 E. Green St., Bensenville, Illinois 60106, USA USA
www.aaronequipment.com | Send Inquiry | Phone: +1-(630)-350-2200
Aaron Equipment Company is a dealer in the process equipment industry. We cater used, unused and reconditioned process equipment. Our mixers are designed for mixing, blending and kneading of medium to more...
Cole-Parmer Instrument Company | Address: 625 East Bunker Court, MS 18, Vernon Hills, Illinois 60061-1844, USA USA
www.coleparmer.com | Send Inquiry | Phone: +1-(847)-549-7600, 800-323-4340
Cole-Parmer Instrument Company provides instruments and technical products, along with valuable information and services. We distribute laboratory and industrial fluid handling products, instrumentati more...
Lectrodryer | Address: 135 Quality Drive, Richmond, Kentucky 40475, USA USA
www.lectrodryer.com | Send Inquiry | Phone: +1-(859)-624-2091
Lectrodryer designs, engineers and manufactures desiccant drying and purification equipment for removal of water and other impurities from air, gases, and liquids. We specialize in custom designed, fu more...
Dynamic Air, Inc | Address: 1125 Willow Lake Blvd., St. Paul, Minnesota 55110, USA USA
www.dynamicair.com | Phone: +1-(651)-484-2900
Dynamic Air, Inc specializes in pneumatic conveying of dry bulk solids for processing industries. We stock equipments and systems for handling a wide range of dry bulk materials from silica sand to su more...
Kason Corporation | Address: 67-71 East Willow St., Millburn, New Jersey 07041, USA USA
www.kason.com | Send Inquiry | Phone: (973) 467-8140
Kason Corporation manufactures screening and processing equipment for bulk solid materials and slurries. Our powder coater utilizes the vibratory energy to coat sticky pellets with non-reactive powder more...
Procedyne Corp | Address: 11 Industrial Drive, New Brunswick, New Jersey 08901-3657, USA USA
www.procedyne.com | Send Inquiry | Phone: +1-(908)-249-8347
Procedyne Corp. ranges from thermal processing systems to major processing and manufacturing industries. We offer system and procedure for fluid bed clean or heat treat. We manufacture fluid bed furna more...
Madison Filter, Inc. | Address: 4563 Jordan Rd. / PO Box 238, Skaneateles Falls, New York 13153, USA USA
www.madisonfilter.com | Send Inquiry | Phone: +1-(315)-685-3466
Madison Filter, Inc. offers technically demanding filtration and process products. We develop filtration and screening systems. Our brand line includes Crosible™, Madison Filter®s, National more...
Industrial Sales Company | Address: P.O. Box 1330, Sherwood, Oregon 97140, USA USA
www.industrialsales.net | Send Inquiry | Phone: (503)-925-8556
Industrial Sales Company specializes in dry bulk material handling, conveying, feeding, screening and processing components, system fans and dust collectors. We also design industrial in-motion weighi more...
Heyl & Patterson Inc. | Address: 400 Lydia Street, Carnegie, Pennsylvania 15106, USA USA
www.heylpatterson.com | Send Inquiry | Phone: +1-(412)-788-9810
Heyl & Patterson Inc. specializes in designing and constructing bulk transfer & thermal processing equipment. We serve industries such as chemical, steel, biomass, energy, ports, and mining & minerals more...
Ran-Le Associates | Address: P O Box 73343, Houston, Texas 77273-3343, USA USA
www.ran-le.com | Send Inquiry | Phone: +1-(281)-821-7348
Ran-Le Associates, Inc. is a manufacturer's representative agency. We specialize in bulk material handling, processing, batching and air pollution control equipment. We cater to chemicals, plastics, f more...
Specs, Inc. | Address: 7151 Office City Drive, Suite 127, Houston, Texas 77087, USA USA
www.specs-houston.com | Send Inquiry | Phone: +1-(713)-645-1600
Specs, Inc. serves bulk solid processing. We cater to centrifugal & thermal drying, screening of dry or wet solids, mechanical conveying and pneumatic conveying systems. We also offer solid metering & more...
The Tennant Company | Address: 17 Briar Hollow #304, Houston, Texas 77027, USA USA
www.thetennant.com | Send Inquiry | Phone: +1-(713)-627-8330
The Tennant Company is a manufacturer's representative. We also provide process related equipments. We specialize in solids processing and environmental equipment. We cater to petrochemical, power, p more...
Campo Sheet Metal Works, Inc. | Address: 6811 Lindbergh St., Houston, Texas 77087, USA USA
www.camposheetmetal.com | Send Inquiry | Phone: +1-(713)-645-1567
Campo Sheet Metal Works, Inc. is a light steel fabricator and heavy sheet metal shop. We specialize in custom fabrications including dust collectors, fluid bed dryers, industrial ductwork, hoppers, be more...
Mark Steel Corporation | Address: 1230 West 200 South, Salt Lake City, Utah 84116, USA USA
www.marksteel.net | Send Inquiry | Phone: +1-(801)-521-0670
Mark Steel Corporation is a custom steel fabricator. Our capabilities include design, fabrication, machining, steel erection and construction solutions. Our non-destructive testing includes radiograph more...
Rama Engineering Works | Address: No. 52A, Gali No. 1, New Rohtak Road, Anand Prabat Industrial Area, New Delhi, Delhi 110005, India India
www.ramaengineeringworks.in | Phone: +91-(0)-9873754101
Rama Engineering Works is a manufacturer and supplier of industrial machinery. Our offered range of industrial machines are used in pharmaceutical, chemical, food processing and cosmetic industries. O more...
Sponsored Links 
 
 EMAIL INQUIRY to  1 to 20 of 79 Fluid Bed Dryers suppliers  Page: [1] 2 3 4 >> Next 20 Results
 BROWSE BY CATEGORY > Materials Handling > Drying
Browse Category   |   Alphabetical Products   |   ALL 250,000 Suppliers
HomeBuyAdd FREE ListingAdvertise Industrial CompanyIndustrial Portal