Low profile rare earth assemblies are high-energy knurled assembly. It is ideal for work holding applications at the wire cut EDM operations.

Lump Breakers are mounted by the bottom of the cone to break up limps to reduce caking and to control better agglomeration when liquid is added to achieve granulation. The lump breaker eliminates the need to pass the product through a mill on the completion of the drying/granulation process.

Magnetic assemblies are components made from permanent magnets and steel parts which are fixed or bonded together. It has a particular magnetic circuit that can concentrate or insulate magnetic power at a target space around the magnetic assembly. It combines of magnetic & non-magnetic materials. They can be utilized for holding, retrieving, moving, lifting and mounting steel parts in different industrial applications. It is customized by using standard matching methods to meet specifications that may require the need to separate, hold, cast and channel.

A magnetic grate consists of a series of magnetic tubes, which have poles alternating between one another and along their length. These units are used for granular free-flowing materials finer than 12 mm and are typically mounted at the discharge of a hopper. These are suitable for removal of fine iron and paramagnetic contamination. The magnetic bars emit high magnetic field across the gaps between them. As material flows into the top of the housing, it is forced to cascade in a zigzag pattern from row to row over the magnetic tubes, this ensures maximum tramp metal capture since the product comes in direct and repeated contact with a magnet as it travels through the housing. Housings are available for both square chutes and round pipelines and are flanged to suit requirement for ease of installation.

Magnet housings with double, triple & four row drawer grates protect machinery from ferrous fragments and reduce operating costs by trapping contaminant in high product flow in-line magnetic housings. It is located over orifices, in spout systems, or below hoppers, the process material is filtered through a chamber where the undesirable contaminant is trapped by the rows of magnetic cartridges.

Magnetic materials are classified in terms of their magnetic properties and their uses. If a material is easily magnetized and demagnetized then it is referred to as a soft magnetic material, whereas if it is difficult to demagnetize then it is referred to as a hard magnetic material. They are classified according to some of their basic magnetic properties. These are utilised in the creation and distribution of electricity, and, in most cases, in the appliances that use that electricity. They are used for the storage of data on audio and video tape as well as on computer disks. These materials encompass a wide variety of materials, which are used in a diverse range of applications.

Mandrel Holders is designed for use with the 3″ x 3/8″ radial bristle discs. It allows stacking of one to four discs depending on the width of the surface to be cleaned. It feature includes 1-3/4″ x 1/4″ mandrel shank size and 3/8″ center hole. It works like a turret. It holds a wide range of bezel, forming and ring mandrels. It can be attached to the top of your bench or to the side to hold a mandrel straight up. It rotates and locks in any position with the turn of a single wing nut. It includes mounting hardware and constructed by aluminum.

Metal extrusion is a process in which the extrusion punch penetrates one surface of the metal to cause it to extrude and flow toward the outlet of the die. It is used to create long objects of a fixed cross-sectional profile. It is used by industry for various purposes such as copper pipe for plumbing, aluminum extrusion profiles for tracks, frames, rails, and mullions, steel rods or track, and titanium aircraft components including seat tracks, engine rings, and other structural parts.

Miniature zinc die-casting is a precision fabricating process offering design flexibility, complex geometries, enhanced material properties, precision and repeatability, and cost-effective production. The process is especially effective as a replacement for screw machining, stamping and assembly. Its advantages include tight dimensional tolerances, complex shapes and geometries, high mechanical properties, good physical properties excellent surface quality and finishing characteristics.

Molten Metal Handling Systems are useful for delivering high melting temperature metals in molten state from a melting pot or crucible to a casting machine and remote from the melting pot or crucible without exposure to the ambient atmosphere. Molten metal handling systems are a pump and heated conduits to carry the molten metal to the casting station. These systems include fabrication, erection and commissioning of overhead monorail, monorail trolley, geared ladle handler, pouring ladles and holding ladles.

Motor Magnets are made from different materials such as neodymium, samarium, cobalt and alnico. Motor magnets are designed with magnets cemented on or embedded. Motor magnets are made from rare-earth compounds and the structure from aluminum metal.

Permanent Magnet Motors consists of a coil of wire called armature. It is arranged in the magnetic field of a permanent magnet in such a way that it rotates when a current is passed through it. The voltage is induced when the coil of wire moves in the magnetic field, which causes the armature to rotate. These are used in a broad power range from mWs to hundreds kWs. There are also some attempts to apply permanent motors to large motors rated at minimum 1MW. These are used in industrial drives, which include pumps, fans, blowers, compressors, centrifuges, mills and hoists.

Moulding Machines are used for compressing the small or dust ore into moderate-sized bricks, which are fed in the furnaces. Moulding machines are distinguished by the method employed to ram the moulding sand, by the method of pattern removal from the moulds and by the drive of the machine. A moulding machine is provided with door means, which are operable to define with external frame members of the machine a closed, air-tight chamber enclosing the moulding area of the machine.

Natural Acetal Rods is a useful replacement for metal in many applications such as gears, pulleys and impellers. It is easily machined with all standard machine tools. Its machinability is equal to or better than free machining brass in the normal operations of milling and turning to threading and tapping. It offers a high degree of dimensional stability, toughness, impact strength, low coefficient of friction and fair chemical resistance. The features include high strength and stiffness, low friction.