4-Way directional control valve pressurizes and exhausts two ports. The valve body consists of 5 ports. A 4-Way valve has four distinct flow paths within the valve and is commonly used to cause reversible motion of a cylinder or motor. Actuating the valve directs flow through input port 1 to output port 4 as output port 2 exhausts through port 3. In the unactuated position, airflow is directed through input port 1 to output port 2 as output port 4 exhausts through port 5.

Aluminum Cylinders comes in various sizes with various pressure ratings. It has a drawback as aluminum is softer than steel it can be dented and gouged more easily than steel tanks. The bottom of the cylinder is flat. The working prerssure for aluminium cylinder is 3,000 psi. Temperature hotter than 180°f reduce the strength of an aluminium cylinder and causes it to explode when filled. The cylinder need not to be galvanized.

Bearing protector helps to increase the life of motors. It is a grounding assembly that diverts static and induced electric currents in motor shafts away from the bearings, protecting them from pitting and potential damage. The solid brass brush holder contains a constant-force spring to ensure that electrical contact between the silver graphite grounding brush and the motor shaft is continuous. It is designed specifically for oil mist recirculation systems.

Center Hole Cylinders are designed for use with screws, rods, cables and pullers. They rated loads from 10 to 60 tons, closed heights from 5-5/8 to 12-11/16 inches and strokes from 2-1/2 to 6 inches. Its feature includes single-acting spring return models, solid bronze gland nuts reduce wear in single-acting rams, quick-connect couplings for fast setup and plain, threaded & grooved saddles.

Centralised Grease Lubricating System is used in industrial and heavy-duty mobile equipment applications to lubricate multiple points on a machine. These systems range from a simple single-port lubricator to complex dual-line, reversing units employing timers and alarms to deliver grease reliably to hundreds of grease points. The design parameters of centralized grease systems include the volume & frequency of grease required at each point, the number of points requiring grease, operating conditions, pump pressure, line diameter and distance to the grease points. Centralized grease systems are designed to lubricate the broadest range of stationary and mobile equipment.

Centralized Lubrication System contains a doser with electromagnetic drive and controlled by a command apparatus & jets. A centralized lubrication system consists of a conventional lever gun that supplies lubricant to a single grease fitting and then feeds a number of grease distribution lines to many lube points. Centralized lubrication system includes a reservoir to store lubricant, a pump to deliver the lubricant, injectors to dispense a quantity of lubricant and associated fittings to connect the components.

Pulling Cylinders are double acting cylinders, designed for working with heavier pulling forces than ordinary cylinders. Pulling cylinders are used for the lifts that have long travel heights. Pulling cylinders provide a compact layout and light weight support frame design. These pulling cylinders reduce stress and increase the life of seals & cylinders.