Ester Refrigerant Oils are used in systems being converted from R-12 to 134a. It is compatible with most materials of construction. It has maximum protection against compressor wear.

A fast-drying lubricant protects metals from friction and gives surfaces grime reducing non-stick coating. It is developed for applications where the piping system is exposed. The service temperature range for this lubricant is from 0° F to 150° F. It is made from a water emulsion that is non-toxic, and does not impart taste or odor, and does not support bacterial growth. It is non-corrosive, non-flammable, and easy to apply by brush or hand, and it quickly dries to a thin film when in contact with air.

Filter-Regulator-Lubricators combines standard series filter, regulator and lubricator into one unit to save space. Its complete unit comes pre-assembled with modular mounting bracket for extra convenience. It has individual components, combination filter-regulator, two-unit modular combinations and three-unit modular combinations. It is pre-packaged or modular assemblies of common configurations of air filters, regulators, lubricators, and gauges. It is used to filter particles and water out of the compressed air coming into the pump. They also control the amount of lubricant reaching the pump through the airline, eliminating over-lubrication and reducing wear. It significantly reduce maintenance costs, optimize pump performance when lubrication .It can be used to quickly and easily control the air pressure to the pump.

Flush Type Nozzle Couplers are used for applications where protruding fittings cannot be used such as line shafting pulleys or revolving bearings. The flush mounting reduces potential for damage. This fitting can be installed in hard-to-reach areas.

Foam depressants control the tendency for foaming. Detergent and dispersant additives can facilitate aeration of oil, which results in foaming. This can reduce the lubricating ability of the oil, and interfere with the pumping of the oil. It is commonly added to hydraulic fluid to expedite foam breakup and releases dissolved air. It often does a good job in increasing the capacity of a given separator. However in sizing a separator to handle particular crude, the use of an effective depressant should not be assumed because characteristics of the crude and of the foam may change during the life of the field. Foam depressant allows more throughput than the design capacity.

Food Grade Oil is used as an ant/stick agent in candy molds and as a lubricant for trolleys & conveyors that carry food. Food-grade oil is used as a precaution against contamination. Food grade oil is prepared by removing some free fatty acids and flavoring chemicals.

Gear oil is motor oil, which is made specifically for transmissions, transfer cases, and differentials in automobiles, trucks & other machinery. It has higher viscosity to protect the gears and associated with a strong sulfur smell. The high viscosity ensures transfer of lubricant throughout the gear train. This device needs heavy oil, which does not have pumps for transferring the oil. This heavy oil can create viscous drag leading to inefficiencies in vehicle operation.

Gear oil is a motor oil. It is made specifically for transmissions, transfer cases, and differentials in automobiles, trucks, and other machinery. It is of a higher viscosity to better protect the gears and usually is associated with a strong sulfur smell. The high viscosity ensures transfer of lubricant throughout the gear train. This is necessary since the devices needing this heavy oil do not have pumps for transferring the oil with only a portion of the lowermost gears bathed in an oil sump. This heavy oil can create viscous drag leading to inefficiencies in vehicle operation.

Grease gun is a common workshop and garage tool, which is used for lubrication. The purpose of the grease gun is to apply lubricant through an aperture to a specific point, usually on a grease nipple. The channels behind the grease nipple lead to where the lubrication is needed. The aperture may be of a type that fits closely with a receiving aperture on any number of mechanical devices. The close fitting of the apertures ensures that lubricant is applied only where needed. There are three types of grease gun. First one is hand-powered, where the grease is forced from the aperture by back-pressure built up by hand cranking the trigger mechanism of the gun, which applies pressure to a spring mechanism behind the lubricant, thus forcing grease through the aperture. The second one is hand-powered, where there is no trigger mechanism, and the grease is forced through the aperture by the back-pressure built up by pushing on the butt of the grease gun, which slides a piston through the body of the tool, pumping grease out of the aperture. And the third one is air-powered (pneumatic), where compressed air is directed to the gun by hoses, the air pressure serving to force the grease through the aperture.

Grease Injector is available in carbon steel or 304 stainless steel types. Its adjustable output range from .008 cu. in. to .080 cu. in. It also available with manifold inlet bolt and necessary hardware. It is used for lubricating fittings with sealed lubrication. Its fitment comprises an elongate needle having a longitudinal passageway formed.

Heat transfer represents one of the most important steps in industrial processes. The subject in it broadest sense can be divided into two categories. The first is transfer of heat at temperatures well below 0° C, such as in air liquefaction plants. Heat transfer at low temperature is normally termed refrigeration and fluids involved in such cases are therefore called refrigerants. The second category involves transfer of heat at temperatures near atmospheric up to 1000 °C and above. The most common fluids applicable in this range includes air, products of combustion (flue gas) and water. The nature of the fluids involved, in particular combustion products and steam, and the urge to conserve energy, establish a strong link between simple indirect heat transfer and energy conservation.

Heat-Sink Grease is a heavy consistency silicone compound, thickened with heat-conductive metal oxide filler, facilitates heat transfer away from electrical or electronic components. It has a stable temperature range of -40° to 392°F.

High Temperature Chain Oil is a synthetic lubricant formulated to resist oxidation and thermal degradation while maintaining stable performance and lubricity over a wide temperature range. High temperature chain oil is a unique formulation of special ester base stocks and the latest additive technology.