Backwashing systems provide economical method of automated solids removal with minimal backwash volumes. It removes the trapped contaminants within the filter bed and washes them down the drain. It reduces manual cleanouts, and chemical consumption, eliminates instrument plugging, and maximizes cooling efficiency.

Baffle is a vertical section or wall within the tank that reduces the velocity of, and directs the waste through, the tank and prevents solids from flowing into the outlet pipe and leaving the tank. Baffles are also installed to assist in the further breakdown of the waste by creating multiple compartments that allow the effluent to sit and separate longer, providing the bacteriological farm more time to operate at greater efficiency. The sizing of the baffles is important. If the baffle or tee is not deep enough, the floating buoyant waste may enter and plug it. If the baffle or tee extends too deep, the downward flow of incoming waste may cause excessive agitation within the tank and result in solids being carried out with the effluent. If sludge or buoyant waste is forced into the distribution box and into the leaching field, the soil will quickly become clogged or saturated. If this happens, the liquid will no longer percolate (absorb) into the soil. Broken baffles in the septic tank that allow sludge or scum to escape can cause this condition. Failure to perform periodic maintenance by having the tank pumped can also lead to a situation where the sludge and buoyant waste overwhelm the baffles.

Bag Filters are used for the removal of dust particles from gases and operated either as pressure filters or as suction filters. These filters are entirely superseded for liquid filtration by other types of filter. Bag filters are disposable, non-ridged replaceable fabric units contained either singly in series or parallel or grouped together in multiples within one vessel. Bag filter are sock shaped devices made of fabric or porous plastic with a stiffened opening into which liquid is poured. Bag filters removes particles over a size range from I to 1000 bum. Bag filters are usually made out of felt fabrics of various natural or synthetic fibers. Bag filters are extensively used in for dust control in industries. Bag filters are used primarily to clean up large volumes of liquid with low contamination.

A desiccant is a hygroscopic substance that absorbs or adsorbs water. It is most commonly used to remove humidity that would normally degrade or even destroy products sensitive to moisture. Silica gel, calcium sulfate, montmorillonite clay and molecular sieves are commonly used as desiccants. The desiccant bags are used in packaging of any materials to protect it from any deformation. The capacity of the bagged desiccant was substantially greater than the other desiccant types like desiccant-coated paper due to the larger size of silica gel crystals.

Ball Transfer Table Tops move boxes, packages, crates in any direction effortlessly. It has material glides over smooth rolling 1″ steel ball transfers mounted on a formed 12 ga reinforced steel deck. It is ideal for assembly work. It has the hand movement of cartons. Each ball transfer handles 50 lbs. Balls are set 1/4 inch above the frame. It is used when products are required to rotated manually or correctly positioned. It is also used when more than two conveyor lines converge and packages transferred from one line to another.

The medium of filter is basket shape is called basket filter. Generally the shape of filter is cylindrical, with its diameter roughly the same as its length. Often self-supporting, made from mesh or perforated sheet, and installed either in a strainer housing or in a centrifuge. This filter can be used in both residential and light commercial applications.