Above ground tank removal is a process, in which the tank is pumped out, and removed. Typically above ground storage tanks are either placed inside or outside of the home. The top of the tank is cut large enough to have a field technician fit inside of the tank. The tank is then emptied and all the contents from the tank is transferred into a new tank on site, or be disposed of at a licensed waste disposal facility. The tank is then transported to an approved site to have it cut, cleaned and scrapped.

AC Motor Dispersers have open motor with in-power of 10A, 110V, 60 Hz and power cord. It has fused variable transformer, digital tachometer and sensor. They have on/off, speed control knob. They are suitable for bench top operation.

AC Motor Homogenizers have standard torque, heavy duty with variable speed. It has 1 HP open motor and variable transformer controller. They have 3″ HSF high shear blade lift on 1″dia. adjustable rod and plate stand & carbon steel. It has forward and reversible on/off switches, interchangeable heads and reversible flow modes.

AC Motor Mixers have variable speed, heavy duty, standard torque and integral digital tachometer. It has transformer controller, mixing shaft, high shear blades, which is lifted on 1″dia adjustable rod. They have plate stand, retort stand optional and carbon steel.

Acoustic cleaner is used wherever there is a build up of dry materials and particulates which need to be cleaned regularly to ensure maximum efficiency and minimize maintenance and down time. It works by generating powerful sound waves which will vibrate the dry materials differently to each other and the surrounding structures. This will create a series of very rapid and powerful sound induced pressure fluctuations which are then transmitted into the solid particles of ash, dust, granules or powder. It causes them to move at differing speeds and debond from adjoining particles and the surface that they are adhering to.

Activated carbon is made by heating organic matter such as wood, coal, and lignite, to leave a carbon residue, which is then activated by partial oxidation with carbon dioxide, steam, or oxygen in air. It comes in the forms of granular activated carbon and powdered activated carbon. It is a widely used sorbent applied to the removal of organic vapors from air, organic solutes from water, and to a certain extent, inorganic solutes from water. It is used for several purposes in waste treatment.