Y Strainers take their name from their configuration. They are typically used in application where the amount of solids to be removed is small, and where frequent clean - out is not required. They are most commonly used in pressurized lines, gas or liquid, but can also be used in suction or vacuum conditions. A Y-Strainer has the advantage of being able to be installed in either a horizontal or vertical position. However, in both cases, the screening element or "leg" must be on the "downside" of the strainer body so that entrapped solids can be properly collected and held for disposal. A blow down plug on the drain port will allow clean-out without removal of the screen, and without interrupting the process flow. Features include Machined, tapered seat ensures a perfect fit for removable, stainless steel screen, Covers furnished with blow off tapping, Heavy gauge perforated stainless steel normally furnished with spot welded seams. For exceptionally fine straining, perforated screens are lined with wire mesh.

Basket Strainers feature top removal of the screen. The screen is in the form of a basket, with a lifting handle, so that all particulate captured and retained by the screen can be easily removed for disposal. They are intended for applications where large amounts of solids particulate are expected and where the clean-out will be frequent. For easily flushable solids, a modified cone bottom basket can be tilted with automatic or manual blow-down through drain port. This will allow clean-out without removal of the screen, and without interrupting the flow process. Features include Large basket size holds sufficient solids for the required time between clean-outs, Top removal of screan with a lifting handle, Maintenance features includes Automatic flush, Davit arm assembly, pressure gaps or difficult pressure gaps, special internal coatings, single or multiple baskets, Baskets made of heavy guage perforated stainless steel lined with wire mesh as low as 5 microns.

Duplex Strainers are designed for applications where flow cannot be shut down to service the strainer screen. Change over is accomplished by use of butterfly valves. This arrangement provides a bubble-tight shut off between basket chambers, essential for use in negative head pump suction systems. They are very economical because they are fabricated to your specific requirements and with your choice of valves.

Tee Strainers is a custom fabricated compound strainer designed to remove foreign particles from pipeline. Tee strainers are used where a compact accessible strainers is needed for protection of pumps, valves and similar equipment.

Procedyne supplies temporary strainers in various styles (Baskets, Cones, Cone type baskets, Plate) which are designed to provide inexpensive protection for pumps, meters, valves and other mechanical equipments. Procedyne can customize baskets to fit your special needs.

Procedyne Engineers designs and fabricates various styles and types of strainers. Our products are designed and built with accordance to the highest industry standards. Fabricated strainers can be designed to your specific application in almost any material. Basket size can be chosen to fit existing piping, or to achieve the required clean pressure drop. Maintenance reducing features include Automatic flush and Hinged cover, with or without davit assembly, to name a few.

Procedyne Automatic Self Cleaning Strainer is designed for continuous removal suspended particles from all type of liquids. Application are in industrial plants using river, lake well or sea water for cooling, descaling, bearing lubrication and similar purpose, pipeline size, 50 mm to 1200 mm or large upon application. Liquids other than water, such as chemicals acids white water (paper mills), sewage and ammonia flushing liquor can also be (coke plant) effectively strained.