(1 supplier)
(1 supplier)
(1 supplier)
(4 suppliers)
(4 suppliers)
CO2 Regulator is a forged brass and die cast for durability and accurate machining. It has molded nylon inlet seal. It also has stainless steel valve seats for high corrosion resistance. It provides constant pressure supply at high output flow rates. It is easy to use dial knob for pressure adjustment. It has nickel-plated valve seats for high corrosion resistance. It is built for durability forged brass body and accurate machining.
(3 suppliers)
(2 suppliers)
(1 supplier)
(1 supplier)
(1 supplier)
(1 supplier)
CO2 separation system consist of a PSA process for the dehumidification of the flue gas exhausted from a thermal power plant (PSA-H2O), a PSA process for the separation of CO2 from dried flue gas (PSA-CO2), a super cold separator for condensing CO2 and a PSA process for the second recovery of CO2 in non-condensing gas exhausted from a super cold separator (PSA-HP).
(1 supplier)
(2 suppliers)
(1 supplier)
(2 suppliers)
CO2 Transfer Pumps are used for on site recharging of CO2cylinders. It includes filling manifold on outlet hose. The filling speed is 6Lbs of liquid CO2 per minute. It is also used with high-pressure supply cylinders.
(1 supplier)
(1 supplier)
(1 supplier)
(6 suppliers)
(1 supplier)
(6 suppliers)
(1 supplier)
(1 supplier)
(1 supplier)
(1 supplier)
(3 suppliers)
(1 supplier)
(13 suppliers)
(1 supplier)
Coagulant Charge Analyzer measures the colloidal charge of a solution. A coagulant charge analyzer is needed to determine the efficiency of the coagulation by measuring the residual colloid charge. It uses a fast, simple titration procedure to correlate jar with a quantified, repeatable charge value resulting in optimized plant performance. Once this correlation is established, jar tests usually become less frequent, or unnecessary. The measurement cell consists of a reciprocating piston in a probe assembly. The movement of liquid between two stainless steel electrodes creates a voltage signal indicating net charge of the sample. This signal is displayed in a range of -10.00 to + 10.00. When the desired plant results are obtained, this number is defined as the optimum charge value.
(8 suppliers)
(26 suppliers)
(7 suppliers)
(1 supplier)
(7 suppliers)
(27 suppliers)
Coal and mineral processing encompasses unit processes required to size, separate, and process minerals for eventual use. These processes include comminution, sizing, separation, dewatering and hydrometallurgical or chemical processing. Coal processing, mainly for reducing ash and sulfur contents in the mined raw coal, requires a subset of processing technologies.
(7 suppliers)
(1 supplier)
(1 supplier)
(1 supplier)
(2 suppliers)
(21 suppliers)
Coal Based Activated Carbon originates from coal that undergo steam activation process to create the activated carbon form. Coal based activated carbon is in powder form. Coal based activated carbon products are made from top quality coal and processed by advanced technology & equipment. Coal-based activated carbon is used to adsorb nitric oxide NO and SO2 at temperatures between 20-140 degree.
(1 supplier)
(7 suppliers)
(18 suppliers)
(3 suppliers)
(1 supplier)
(0 suppliers)
(1 supplier)
(3 suppliers)
(1 supplier)