A  B  C  D  E  F  G  H  I  J  K  L  M  N  O  P  Q  R  S  T  U  V  W  X  Y  Z  1  2  3  4  5  *
1 to 50 of 4975 results  Page: [1] 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 >> Next 50 Results
O Ring Adapters (1 supplier)
Adapters are designed to adapt a female connection to another size and or type of connection without the need for additional couplings. Adapters provide the flexibility needed for both large complex systems to simple tube racks. These adapters are used in fluid handling components for the chemical/petrochemical, research, and oil and gas industries. O - Ring adapters are made of various materials like steel and polypropylene. O-ring adapters make a minimum volume connection from the 10-32 or 5/16-24 female threads used on our on/off and prime/purge valves and on some gauges, regulators, and flow controllers to external fittings.
O Ring Face Seal (9 suppliers)
O Ring Face Seals are intended for general application and hydraulic systems on industrial equipment and commercial products, where elastomeric seals are acceptable to overcome leakage and variations in assembly procedures. These fittings are capable of providing leak-proof full flow connections in hydraulic systems operating from 95 kPa (28 in Hg) vacuum to working pressures. For any application, it is recommended that sufficient testing be conducted and reviewed by both the user and manufacturer to assure that required performance levels would be safe. The rated working pressure of a fluid conductor assembly shall not exceed rated working pressure of the lowest rated component.
O Ring Face Seal Fitting Female Swivel (1 supplier)
O Ring Poppet Valves (1 supplier)
O Ring Removers (1 supplier)
O Ring Restriction Orifice Unions (1 supplier)
O Ring Seal Weld Adapter (1 supplier)
O Ring Seals (27 suppliers)
O-Clips with Insert Ring (2 suppliers)
O-Clips, Mild Steel (3 suppliers)
O-Clips, Single Ear (2 suppliers)
O-Clips, Stainless Steel (3 suppliers)
O-Flute Bits (1 supplier)
O-Flute Downcut Spiral Bits (1 supplier)
O-Flute Slow Spiral Bits (1 supplier)
O-Flute Straight Bits (1 supplier)
O-Flute Upcut Spiral Bits (1 supplier)
O-Frame Scanners (1 supplier)
O-Lift Bucket Elevators (1 supplier)
O-Point Drill Grinders (1 supplier)
O-Ring and Receiver Groove Cutters (2 suppliers)
O-Ring Assembly (10 suppliers)
O-Ring Backed Seat Carbon Steel Two Way Ball Valves (1 supplier)
O-Ring Backing Cushion Cpvc Full Port Ball Valves (1 supplier)
O-Ring Blocks (3 suppliers)
O-Ring Brass Air Valves (2 suppliers)
O-Ring Brass Valve Housing (1 supplier)
O-Ring Carbon Steel Two Way Ball Valves (1 supplier)
O-Ring Chains (2 suppliers)
O-Ring Check Valves (2 suppliers)
O-ring Cords (7 suppliers)
O-Ring Crack Cylinders (1 supplier)
O-Ring Crack Dies (1 supplier)
O-Ring Energized PTFE Cap Seals (1 supplier)
O-Ring Extractor Kit (1 supplier)
O-ring Extractor Tools (1 supplier)
O-Ring Face Fittings (1 supplier)
O-Ring Face Seal Fittings (7 suppliers)
O-Ring Fittings (1 supplier)
O-Ring Gages (1 supplier)
O-Ring Gauge (2 suppliers)
O-Ring Gauge Cone (1 supplier)
O-Ring Gripper (0 suppliers)
The O-ring gripper is prepared for picking and placing O-rings on the parts. It has two pistons, which are driven independently of each other. The spreading jaws are double acting and the ejecting jaws are single acting. When pressure is applied to the first piston, 6 parallel jaws spread the o-ring. The stroke can be precisely adjusted using the setscrew. After the o-ring is expanded, air is supplied to the second piston. This causes the ejector jaws to press forward and push the o-ring from the spreading jaws onto the part being assembled. It is stretched evenly in a hexagonal shape; this allows the O-ring to be expanded with considerably less deformation. This can be tooled to accommodate all types of rings, the smallest would be the smallest make tooling jaws to fit the inside diameter and the largest is approximately four inch diameter depending on the cross section.
O-Ring Groove Gages (2 suppliers)
O-Ring Identifier Tool (1 supplier)
O-Ring Insertion Machinery (1 supplier)
O-ring Insertion Machines (0 suppliers)
O-Ring Installation Machines (1 supplier)
O-Ring Kits (16 suppliers)
O-Ring Lubes (1 supplier)
1 to 50 of 4975 results  Page: [1] 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 >> Next 50 Results
Browse Category   |   Alphabetical Products   |   ALL 250,000 Suppliers
HomeBuyAdd FREE ListingAdvertise Industrial CompanyIndustrial Portal