Barrel clamp consists of a lifting device used for lifting plastic drums and barrels. The lifting device uses a locking bar. This bar is capable of locking the device in open positions preparatory for securing the barrel and lifting position. It maintains locked positions. It uses a minimal amount of friction force to lift a barrel such that the fragile resilient sides of a plastic barrel are not damaged.

Barrel Dispenser is a compact & lightweight flow-controlling device designed for dispensing liquids from horizontally stacked barrels. The opening is controlled by spring-loaded spindle, which always keep the valve in closed condition. Barrel dispensers are directly fitted to MS and HDPE plastic barrels.

Barrel Finishing System is used for wet and dry processing applications. It includes barrel tumblers, metal polishing equipment, deburring machines, tumbling barrels and deflashing machinery. It is available in two types that include wet barrel finishing system and dry barrel finishing system. Wet barrel finishing is a batch system for removing excess material or polishing parts, employing water and other agents to form radii, remove burrs, improve surface appearance, polish and clean. It works well for processing metal. It is also used in dry tumbling operations. Dry barrel finishing is a batch system for mass polishing or removing excess material from plastic or metal parts without liquids by tumbling them in a media and compound mixture. It is suitable for finishing very delicate parts that would be damaged in a wet barrel. A dry system produces a smoother and higher finish. The finished parts have more of a hand-buffed appearance with greater uniformity in the end product.

Barrel nuts are used to minimize drilling and eliminate the need for long expensive bolts when attaching heavy structural members in high-tensile applications, such as hanging aircraft engines, attaching wings and tails to the fuselage. Barrel nut retainers are sheet metal parts that clip on barrel nuts to facilitate their installation in holes and alignment with mating bolts. It is fabricated in advanced aerospace alloys. Its design includes floating or nonfloating, metallic lock or nonmetallic ring, tandem nuts with spreaders, spreaders that articulate and barrel nuts with attached retainers or lanyards.

Barrel Pump is a small pump with an extended suction duct that is designed to pump fluid from barrels. It is commonly used to decant liquid additives during the preparation of treatment fluids at the well site. With each rotation of the barrel, the water inlet scoops in a half-coil of water and a half-coil of air. The section of air trapped inside each coil functions as a spacer. It moves most of the air and it should be cleaned and lubricated.