Water pressure reducing valves are designed for use with supply water pressures up to 200-PSI inlet side. There are two types of water pressure reducing valves such as direct acting and pilot operated valves. Direct acting valves consist of globe-type bodies with a spring-loaded, heat-resistant diaphragm connected to the outlet of the valve that acts upon a spring. This spring holds a pre-set tension on the valve seat installed with a pressure equalizing mechanism for precise water pressure control.
Water Pressure Regulator is in brass will protect your water system by reducing abnormally high inlet pressure to a safe 40 to 50 lbs. It is made of top quality brass with pressure adjustment, union, and strainer. It has spring range of 10-70psi. These gauges are pre-set to 45 psig. It reduces water pressure to a safe and consistent pressure.
Water pump bearings are used mostly in automotive water pumps. It consists of a standard double row bearing. The outer ring raceway of this bearing is spherical, with the center of the radius located on the bearing axis, providing a self-alignment capability. It provides 45 degrees contact angle that enables the bearing to support large axial loads and moderate radial loads.