Fire Alarm Control Panels are systems, which receive information from input devices, process the information and trigger an output device. Fire alarm control panels feature back-up batteries, built-in printer, data storage, explosion-proof housing, remote telephone interface, submersible ratings and volume control adjustments. Its application includes machine failure or malfunction, process control panels and structural failure.

Fire alarm system is an active fire protection system that detects fire or the effects of fire. This system notifies the occupants & persons in the surrounding area, summons the fire service, and controls all the fire alarm components in a building. It includes alarm initiating devices, alarm notification appliances, control units, fire safety control devices, annunciators, power supplies, and wiring.

Fire hydrant meter is fitted for a fire hydrant connection and is designed to measure flows from 35 gpm up. The pressure drop through the meter is approximately one pound per square inch at 200 gallons per minute. The body is constructed of cast aluminum alloy, with a stainless steel liner. The propeller is made of polyethylene plastic and all other wetted parts are made of bronze or stainless steel materials.

Fire service turbine is designed for applications where fire service and drinking water supplies are fed by a single line. Its design combines low-slow sensitivity of disc meters with high-flow capacity of turbine meters for an extremely wide flow range. The fire service turbine meter is designed to measure both domestic and fire service water usage through a single water line.

Fixed Differential Vacuum Switch is housed in pressure die cast aluminum powder coated enclosure. They are recommended for panel mounting or outdoors service based on the type of enclosure. It features separate chamber for working parts, pressure port 1/4 inch and electrical rating of 5A, 250 VAC & 0.2A, 250 VDC.

Fixed Infrared Thermometers are used to measure the temperature of materials in a fixed location such as a process control loop. Fixed thermometers are also called online thermometers and available in a variety of body formats, operating wavelengths and output signals.

Fixed load tester is used to gauge the batteries ability to withstand the load when the vehicle has to be cranked. It is connected to the battery terminals with the help of metal spring clamps. Recess meter helps to protect hand-held tester from damage. It features heavy-duty insulated safety clamps with 300-amp jaws and side terminal adapters.

Fixed position gas detector is a flexible component system providing a variety of options to meet individual gas detection and alarm requirements. It is a good choice for reliable leak detection. It consists of individual modules that can be located where required. Sensor/transmitters located in the area where gas leakage or buildup might occur, provide the basic measurement for the system. Receiver modules provide the electronic brains for the detection and alarm system. This detector consists of a digital display to show gas concentration, isolated analog output, and 4 relay outputs.

Fixed Range Pressure Transmitter is a compact loop-powered transmitter that accurately and reliably measures pressure on equipment that is either continuously or frequently immersed in fluids. The 316 stainless steel pressure port and housing, viton o-ring seal and ceramic sensor make the wetted parts of the 510 immersible pressure transmitter chemically compatible with most gases and liquids. It is designed for years of stable performance in even the toughest environmental and media conditions. The small size and lightweight of transmitter eliminate the need for complicated mounting hardware and mechanical supports. The in-line connection permits simple field wiring without the need for additional hardware, adding to the speed and ease of installation.

Flanged external cage liquid level switches are completely self-contained units designed for side mounting to a tank or vessel with threaded or flanged pipe connections. The buoyancy force of the process liquid on a float causes the float to move with the liquid surface. The movement of the float moves an attraction sleeve into the field of the switch magnet, pulling the magnet toward the sleeve and actuating the switch. It is used in accumulator, receiver and scrubber applications.

Flanged Pressure Gauge have 6-inch dial protected by impact-resistant & clear polymer lens, which provides fast, accurate readings at a glance. It has rugged design, which enables accurate pressure measurements on cementing, acidizing, fracturing and choke manifolds. Its feature includes integral operator-adjustable damper eliminates pointer oscillations and replaceable diaphragm rubber & field-repairable diaphragm.

Flexible axis meter (FAM) is a water meter used for residential and commercial sub-metering. With a register that can be rotated through 360º the FAM can be fitted to pipework that is vertical, horizontal or any angle in between. This reduces the cost of installation and sub metering process. For faster and less expensive meter installation the FAM can be installed on pipework at any angle. The measuring chamber is placed horizontally to attain maximum accuracy. The FAM offers the noiseless operation critical for sub-metering