Commercial Coils have built- in thermal sensors that shut the device down if the coil temperature exceeds a safe limit. Commercial coils provide quality OEM and replacement coils for commercial, industrial and HVAC markets.

Commercial washing machines are designed to clean laundry, such as clothing, towels, and sheets. It is typically intended for more frequent and long-term usage than a standard consumer washing machine. Most commercial washers have a very sharp-edged square appearance, often with completely stainless steel exteriors to minimize rust and corrosion in a constantly moist environment. Often commercial washers are installed in long rows with a wide access passageway behind all the machines to allow maintenance without moving the heavy machine.

Composite pressure vessel is a pressure vessel whose structure is made of composite material. It is designed to withstand internal pressure using graphite and aramid, or glass fiber in a polymeric matrix.

Compressed Air Filter is used to remove liquid and solid contaminants of various sizes. There are several basic types of compressed air filters. All are designed to remove contaminants, but some have specific features that make them better-suited for particular applications. Compressed air filters are also used to remove water, oil, oil vapor, dirt and other contaminants from a compressed air supply. This product area includes water separators, centrifugal separators, oil separators, air oil separators and demisters. Filter size rating, maximum air volume, maximum inlet pressure and operating temperature are the most important performance specifications in compressed air filters. As a rule, filter size rating is the low end of the size-range that is filtered or blocked. Bowl size, bowl drain, and bowl material are also important parameters for compressed air filters. Bowls for a compressed air filter feature a manual or automatic drain and are made of aluminum, polycarbonate, steel, stainless steel or zinc. A pressure gauge for a compressed air filter provides a direct measurement of operating pressure or pressure drop. 

Compressed air filtration is one type of filtration process that removes solid particulate, moisturize and oil dropouts carrying with the compressed air. It is utilized in water separators, centrifugal separators, oil separators, air oil separators, and demisters. It is simply the removal of air borne particles from a moving pressurized air stream.

Computer Tomography involves continuous data acquisition throughout the volume of interest by moving the patient through a rotating X-ray source-detector system, which is known as gantry. Computer tomography is applied in radiography and in emission radiography. Computer tomography is an imaging process permitting insights into to interior of a spatial body.

Condensation dryers are used to pass heated air through the load. However, instead of exhausting this air, the dryer uses a heat exchanger to cool the air and condense the water vapor into either a drain pipe or a collection tank. Afterwards, this air is run through the loop again. The heat exchanger uses ambient air as its coolant, therefore the heat produced by the dryer will go into the immediate surroundings instead of the outside.

Condenser Coils are made of drawn brass pipes. Condenser coils are heavily coated with soluble solids from the spray water. These coils are designed for the high pressure and temperature associated with refrigeration condensing & the outdoor environment.

Condenser tube inspections are conducted with the unit on-line. When an operating unit experiences contamination of the hotwell condensate due to cooling water intrusion from a condenser tube failure, it is imperative the source of leakage be identified immediately. This can identify most failures within one operating shift of gaining access to the suspected water box. This includes the identification, plugging, and retesting of the tube bundle.