Contra Rotary Mixer is an ideal mixer for the products of high viscosity and density. It is suitable for thorough mixing/blending of toothpaste, grease and other viscous compounds. The mixer consists of two different blades rotating clockwise as well as anticlockwise at the same time. It consists of solid shaft with multiple paddle blades, which rotates in clockwise direction while the hollow shaft with anchor scrapper blades assembly rotates in anti clockwise direction.

Coolant filter system is designed to extend coolant life by preventing the accumulation of contaminants anywhere in the machine tool system. It has media-free filtration and solids are collected automatically into drum or hopper for low volume applications allowing for easy disposal. It eliminates chips from clogging the coolant tank, and damaging the pump.

Copper serpentine fin machine is used for making copper serpentine shaped fins. The patented pin roll tooling that produces high quality fins. The pin roll tooling pre-forms the fin bend radius to control radius location and size. Fin height adjustments are made to accommodate for different fins per inch. Its louver rolls cut with little friction and the louvers are air formed to achieve a consistent louver angle with little wear or damage to the rolls. Its arbor size ranges from 4, 6, 10, 12 and 16 inches. It is 100psi moisture free air. Its maximum strip thickness is about 0.0018 to 0.005 inch. Its strip width ranges up to 4.0 inch. Its power ranges from 120vac, 60 Hz and 20amp.

Corrosive fume scrubber is a fluidized bed technology. It is capable of handling gases with solids entrained and a design resulting in smaller diameter towers for equivalent gas flow rates. It is primary used for large volume continuous knockout of liquid entrainment and washing of corrosive fumes. These are widely used in the chemical, pharmaceutical, and metal finishing industries.