Single cartridge mechanical seals are used in processes using non-hazardous, non-corrosive materials. A single cartridge seal is usually located outside the pump housing, and is not exposed to the material or product being pumped.

Single chamber fabricated meter run assemblies are manufactured from different alloys. These alloys are ideally suited for fluid conditions found in orifice flow measurement applications. The following service criteria should be considered in determining the correct material se-lection for the Orifice meter run assemblies. They are the fluid to be measured , temperature of the fluid and the pressure in the meter tube.

Single Chamber Orifice Fitting is designed for use in installations in which the line can be depressurized to change or inspect the orifice plate. Single Chamber Orifice Fittings come standard with O-ring seals both on the body and the seal bar. This feature eliminates nuisance gasket maintenance and clamping bar screw breakage while providing superior sealing capability. The O- rings incorporated are standard shelf sizes and can be supplied in a wide variety of compositions. Gaskets can also be used when preferred or required. On 8″ and above, eccentricity of the Orifice Plate Carrier is fully accessible and adjustable from the exterior of the Orifice fitting.

Single channel analog inputs modules are complete single-channel data acquisition systems that are well suited to applications such as SCADA, data monitoring, data loggers, PLC's, process controllers and instrumentation. The analog signal input types include voltage, current, temperature, flow, bridge and load cell. It converts the digital signal data into engineering units using look-up tables. The resultant data is stored in a memory buffer. The module's ADC continuously converts data at the rate of 8 conversions per second and stores the latest result in the buffer.