Drum blasters is a device used to clean parts to a bright metal finish and cuts cleaning costs dramatically. The drum is loaded on the blaster rollers, the door is closed and the cleaning cycle timer is set to the desired time. After the cleaning cycle is complete, the clean drum is removed from the rollers and another drum is placed on the rollers. The blaster can clean a wide variety of parts and is not limited to cleaning drums with the purchase of small parts basket. Barrel blaster is suitable for cleaning all types of barrels and drums. It eliminates extensive handling and potential damage to barrels by offering one-step, one-insertion cleaning.

Drum Adaptor Vacuums are the solution for the job that requires a vacuum with an extra large wet and dry capacity. Its features are heavy-duty boiler cleaning, flood control, recovery of materials or reprocessing, steel motor heads, construction cleanup and industrial applications. It is available in electric and air-operated models.

Drum Air Mixers are used on all standard open and closed drums. The drum agitators are supplied with marine style propellers or collapsible impellers that fit through a 2″ opening and the drive threads directly in the NPT bung opening for quick and easy operation. or open drums, the mixers are supplied with drum lid. Electric motors are used for mild/medium agitation and air motors if vigorous mixing is required. Air motor offer 1/2 to 1 horsepower range.

Drum and container pumps are used to dispense the contents of drums, container and tanks. These pumps are driven by a variety of methods including hand operation, electric, pneumatic, and hydraulic driven motors. The common types of drum pumps are the diaphragm and piston pumps. These pumps drive fluid via a pulsed discharge due to the characteristics of the pumping technology of cycling air or fluid through the pump system.

Drum and Tote Pumps are used for simple chemical transfer and for viscous materials.

Drum Bung Entering Air Mixers is screwed in to the 2″ NPT bung opening of the closed drum for quick and easy mounting on standard steel drums. The special adapter allows the shaft to be at an angle for optimum mixing. The standard folding impeller in SS304 folds for entry and opens to 4″ diameter when mixing. The impeller comes with a hub that allows adjustment anywhere on the shaft.