Water-based gas turbine compressor cleaner is designed to use for both on line and off line wet cleaning applications. It provides excellent cleaning efficiency similar to that attainable with most solvent-based products. It is formulated from a combination of non-ionic surfactants and emulsifiers specially designed to remove deposits commonly find in gas turbine compressors. For on line cleaning the diluted fluid is injected into the compressor section of the turbine while the unit is in operation. Average power loss is reduced and periodic off line cleaning intervals can be extended. For off line cleaning using typical soak and rinse procedures is used at the same dilution strength and power recovery is normally significant.
Water-based sealer is an emulsion of modified acrylic resin. This unique acrylic emulsion is a premium clear durable sealer that works over concrete stains. It contains UV inhibitors that provide a uniform non-yellowing film. It can be used for interior or exterior applications and exhibits great resistance to oil and gasoline products. It creates a barrier against stains that can permanently damage a floor surface while providing a uniform, smooth surface. It is recommended for use on resilient tile, terrazzo, honed marble and quarry tile floors.
Water-Sealed Liquid Ring Systems are used in soil and groundwater remediation systems. It has no recovery , partial recovery and full recovery water sealed vacuum systems. It consists of fluid transfer pump tank level sight gauge and level switches, recirculation line with isolation valve, inlet strainer and vacuum gauge. It is used for applications where water contamination is not a problem but water saving features are desired. Vacuum knockout tanks trap collected groundwater and condensate.