In protective relay calibration test, each relay is inspected and adjusted to correspond to the manufacturer's operating time/current curves. Each relay is tested at two different multiples of relay current settings and operation verified within the manufacturer's time/current specifications. The relay is inspected to make sure it is clean and free of contamination.

Puncture Impact Testing using a swinging pendulum arm overcame all of the previous difficulties. This shape ensures that the orientation of the test sample relative. The material is sensitive to the way in which loads are applied. It tends to measure the test result as units of energy to break the test sample. It is based on the pendulum impact system commonly used for Izod and Charpy impact tests which has proven to be very reliable for many years now and takes full advantage of a microprocessor controlled system. The tup profiles can quickly be changed which makes it ideal for evaluating packaging materials, especially as in most cases the tup can represent the components that are to be packaged in the material. The test sample takes a circular form so that the orientation of the material relative to the manufacturing processes is not effected.

Radial growth test is conducted for quantifying diametrical or radial growth of high RPM rotating parts. The forces on rotating parts grow alarmingly fast as rotational speed increases in any high speed rotating equipments. This can lead to substantial diametrical growth, which must be taken into consideration during the design, particularly, if touching a nearby stationary component is possible. It is a recent test done for a high-speed motor manufacturer. This test helps the customer's engineers to balance the flux density, manufacturing tolerances and material selections to optimize the motor/stator air gap.

Radiation shielding equipment is used for pharmaceutical, nuclear medicine applications and nuclear power plants. It comprises a hand-held main body and an antenna. It also encases the inductive coil for producing the capacitance between shielding case and inductive coil.

Radiography Equipment includes projection-type cameras that use a cable to drive a radiation source through a guide tube. It is the instrumentation needed for the performance of the tasks associated with radiographic procedures. It is used in radiological and nuclear detection. It is used for X-rays of head, chest, back, arms, legs, hands and feet.

Radiography Testing involves the use of penetrating gamma or X-radiation to examine parts and products for imperfections. Radiation is directed through a part and onto film or other media. The resulting shadowgraph shows the internal soundness of the part. Radiographic applications fall into two distinct categories such as evaluation of material properties and evaluation of manufacturing and assembly properties. Material property evaluation includes the determination of composition, density, uniformity and cell or particle size. Manufacturing and assembly property evaluation is normally concerned with dimensions, flaws, bond and verification of proper assembly of component pieces.

Retractable Coupon Holder is used to insert corrosion coupons into a pressurized line through a valve without shutting down the line. Retractable coupon holders are used up to 1500 psi and 500°F (260°C). This coupon holder design employs a packing gland that allows insertion & removal through a ball valve without system depressurization.

Rub Testers is used for moving a weighted test strip over a printed specimen through an arc. It is an affordable abrasion testing instrument that retains all the features that made it an industry standard plus improvements that insure it will remain the industry standard. The stroke of the tester is shortened that increases the precision and more closely simulates abrasion damage found in the field. It is also designed to measure scuffing or rubbing resistance. It allows decreasing the testing time for samples requiring a higher number of rubs. An optional heated weight provides a uniform test for evaluating hot abrasion resistance of printed cartons and labels. It is used for quality testing of commercial print and packaging where surface rub durability is required. The instrument uses the latest technology, including digital logic control to provide consistency and accuracy with ease of use.

Sand Probes are used to detect erosion in flowlines caused by abrasive particles such as sand. Sand probe is a single pole double throw, electric switch assembly designed to operate in conjunction with shutdown controls.

Scanning electrochemical microscope systems are precision scanning microelectrode system. It is used to monitor current flowing between a microelectrode and a specimen surface in solution at extremely high spatial resolutions. It can be used to examine, analyze or alter the surface chemistry of a sample in solution. This equipment has many potential applications in the study of fundamentals of surface reactions.