Vibration switch is used for the protection of rotating plant and reciprocating machinery operating in hazardous areas. It is adjustable to operate above the normal running levels of vibration, activating alarm or machine shutdown circuits. It features easy alarm setup, LCD display, start-up trip delay, alarm trip delays, LED alarm indication, remote alarm reset input and velocity response. Its application includes industrial fans, compressors, centrifugal pumps, motors and cooling towers. Vibration switches electronically integrate the acceleration signal giving displacement or velocity signal as per the requirement.

Vibration testing is the shaking of a product or package to determine its ability to survive in real world conditions. It is, in brief, is the shaking or shocking of a component or assembly to see how it will stand up to real world conditions. It is used in applications ranging from circuit boards and aircraft to vehicles and household appliances. Conducting these tests in the field or the laboratory involves the use of data analyzers, climatic chambers, controllers, instruments and vibration exciters. The procedure for vibration testing involves placing the product or package on a vibration testing table, which is driven so that the surface of the table vibrates. Shock and vibration testing is a subset of product and component testing, a larger category that includes electrical, life, environmental, exposure, dynamic, ergonomic and other specialized tests. Common capabilities of shock and vibration testing services (dynamics) include testing and simulation, component and product comparison, certification and qualification, data acquisition and instrumentation, design verification testing (DVT), failure mode and effects analysis (FMEA), sample preparation, and research and development. Safety, liability, performance, and in-line or in-process testing services are also available.

Vibration transducers are used for the measurement or sensing of the force of the acceleration. The most commonly used vibration transducers are the eddy-current proximity probe, which measure vibratory displacement of the shaft, and the accelerometer, which measures vibratory acceleration of a nonrotating part of the machine structure.

Vibration Transmitters provide electrical outputs that are proportional to vibration inputs. Vibration transmitters collect vibration information from a machine and evaluate the data so that maintenance is performed based on trends in the machineries condition. Vibration transmitters provide a 4-20mA signal that is directly proportional to the overall vibration level of the machine. Vibration transmitters use root mean square (RMS) vibration measurements for accuracy. Vibration transmitters are used to sense machine imbalances, shaft misalignment and mechanical looseness in machinery.

Vibration troubleshooting is the most effective tool for identifying a problem's root cause. After the cause is positively found, this testing is further used to gain a thorough understanding of why the problem exists. Corrective action can then be engineered to eliminate the problem at hand without creating a new one. Vibration troubleshooting is routinely applied to rotating and reciprocating equipment to assess general mechanical health. Bearing, motor, gearbox, driveline and foundation problems can be easily identified prior to becoming an operational problem.

Vibration Velocity Monitors are compatible with voltage output accelerometer & velometer inputs and provide a 4-20 mA output proportional to the overall measurement. Each unit provides power for the associated transducer, processes the vibration signal to determine overall amplitude and outputs a 4-20 mA dc current that is proportional to a user specified range such as 0-0.5 in/sec. These monitor features DIN rail mount, voltage output accelerometer or velometer input, 4-20 mA output, fault detection, buffered transducer output, alert & danger alarms and remote reset.

Vibration Velocity Transmitters are compatible with voltage output accelerometer & velometer sensors and provide a 4-20 mA output proportional to the overall measurement. Each unit provides power for the associated transducer, processes the vibration signal to determine overall amplitude and outputs a 4-20 mA dc current that is proportional to a user specified range such as 0-0.5 in/sec in peak or RMS detection. They have BNC connector, which is mounted on the front of the unit that provides access to the buffered transducer output signal. These transmitter features DIN rail mount, voltage output accelerometer or velometer input, 4-20 mA output, fault detection and buffered transducer output.

The vibrator accessories consists of pneumatic components, which includes lubro-control units and filter regulators. The lubro-control unit filter, regulate and lubricate compressed air. Regulation of air controls the frequency and force output of pneumatic vibrators. Filter regulators regulate and filter an already lubricated, compressed air supply.