Immersion tube burners give unsurpassed performance in applications where liquids are heated by direct-fired tubes. These are used in a variety of industrial processes to heat solution tanks containing liquid. It is used extensively for melting zinc. These are nozzle mixing sealed-type burners used for liquid heating.

Industrial market research is intended to provide objective market information used to reduce uncertainty and make rational and effective marketing decisions to improve profitability. Without obtaining and using recent market research information, companies run the risk of making flawed planning decisions that can negatively impact their businesses.

Infra Red Burners produce heat in excess of 1600 degrees perfect for searing steaks, boneless chicken breasts, pork chops, shish kabobs and vegetables. Infrared burners produce two kinds of heat such as radiation and convection heat. Infra-red burners are designed to provide complete coverage of a large cooking area. Infra-red burners are protected by stainless steel rod-grate. These burners use the flame to heat a ceramic or metal surface, which then radiates heat towards the ground.

Jointing Compound is used for air-drying applications for bedding tape and finishing joints. It has sand with 150 grit papers. It is suitable for bedding, filling and finishing joints and nail/screw heads.

L.C.Blowers with Filter Inlet are rugged, dependable and constant pressure machines. These blowers are used for many industrial and commercial applications requiring air at a specific pressure & volume.

Lab scale reactor system consists of a cylindrical retort, which is heated electrically by two separated PID-controllers. The fuel is put in a cylindrical holder of 100 mm height and 95 mm in inner diameter. Both parts are made of fibre-reinforced silica carbide (SiC) -ceramics to avoid reactions of CO, NO and ash with the wall and to avoid oxygen entering the reaction zone. The mounting and vessel for the fuel bed are mounted on a plate, which is placed on a mass balance. Air or an O2/N2 mixture is introduced through a porous plate at the bottom of the fuel bed. The combustion air supply is performed under the fuel bed through the plate. A liquid sealing filled with thermo oil is used to separate the mass balance and the reactor mechanically.

The concept of leak before break implies that any crack or defect which develops in a component will grow to a through-wall configuration, and can be detectable by plant monitoring systems before reaching a size that significantly reduce margins to component rupture. It is widely used in structural integrity design of pressurized components and vessels. LBB analyses are based on advanced fracture mechanics techniques. It is used as part of overall safety assessments for leaving real or postulated flaws in service for some operating period.