Pipe and bend heat exchangers are used for very high pressure applications in upstream and midstream industry segments such as reinjection, liquefied natural gas and pipeline. This equipment uses a header made of forged pipe to accept very high pressures, but it is recommended for use with clean fluids since no inspection openings are provided. Its fully welded design is especially suitable for critical and hazardous applications. The applications are upstream- gas lift, gas processing and recompressing, gas reinjection, & LNG plants.

A pipe anchor is used to support the air lines of a railway car. It is made up of two substantially identical components. One of the components is welded to the car, and the other mobile component is brought into locking engagement around the pipe. Each component has a pair of opposed inclined legs. The mobile component is inverted relative to the other, and the legs slidably engage into a locked position embracing the pipe.

Pipe and Cable Trackers locates conductive material and outputs highly accurate survey data on most types of subsea pipeline or cable. Target detection is performed through pulse induction, which provides considerable advantages over magnetometer-bases systems. This utilizes pulse induction technology and advanced digital signal processing to accurately determine ranges to buried pipelines or cables. The system is capable of detecting any conductive material and advances in signal processing techniques.

A moderate curve can be formed in small sizes of pipe and tubing by hand bending. After a point, however, the inner wall of the pipe will start to collapse, forming a crimp. Sharper bends may be formed with a pipe bender because the bending shoe supports the wall of the pipe and allows them to stress without collapse. The larger-sized benders use a hydraulic cylinder similar to an automobile jack to create the necessary force.

Pipe bends are, for the most part, large radius elbows. These are fabricated with pipe bending machinery rather that cast or forged as are conventional fittings. It has many uses in modern steam installations primarily to provide flexibility in piping assembly. These compensate for expansion and contraction as well as reducing the internal resistance to flow experienced in pipe fittings. It has many different shapes and forms with numerous arrangements for outlets and connections. It can be made in all sizes of steel pipe.

Pipe blaster is used to clean the exterior surfaces of pipes. It is capable of cleaning a continuous flow of pipe with a diameter between 1/8in and 13ft. The blast unit incorporates impeller driven blast to clean pipes on a production line basis. It involves the pipe through although non-rotating.

Pipe bollards are used to protect plumbing risers, parking equipment or other fixed objects that are susceptible to damage. However, pipe bollards are often too short to be seen by a driver backing out of a stall. A minimum height above floor level of 4″-0″ is recommended, which corresponds to a typical driver's eye-level of approximately 45 inches. Pipe bollards are also known as bumper posts or pipe guards, which are designed for security, property protection from vehicle ramming, traffic control and pedestrian safety. Bollards styles range from utilitarian for basic security needs to aesthetically designed barriers that add color, texture and architectural interest without compromising safety and protection.