Bleed valves are used to bleed air from flow lines and to aid in priming pumps. The bleeder valves provide for easy operation to release air or fine amounts of liquid through the port. It also performs as a needle valve, allowing a very fine adjustment of flow. 

Block & bleed valves are back seated block valve along with a bleed valve with directional discharge tube and stem stop. It allows pressure to be bled and blocked for simplified instrument removal using a gauge. The discharge tube enables the technician to direct the high-pressure fluid away from changing the instrument. It can also be threaded into a hex primary block valve to provide secondary block and bleed functions on multiple instrument installations.

Block Cylinders are used as building block for pick & place. These are used as a built in magnet for sensor applications. These are sized with 8-25mm bore. These are calculated by metric or inch threads. It has 303 stainless piston rods. These are available in single and double acting versions with bore sizes from 16mm up to 200mm. They can operate at pressures up to 500 bar and produce forces up to 1,570 kN. The range includes steel, bronze and aluminium body types with various mounting options including manifold versions.