Bolted Nozzle Ball Valves support bolts are furnished in stainless steel for external resistance to corrosion. Ball is diamond turned after molding to spherically perfect to assure precise sealing .The ptfe self-lubricating stem bushing prevent binding and provides low torque turning.  It provides premium corrosion resistance for most inorganic acids and caustics. Valves are available in standard and full port in most sizes.  Optional mounting brackets and locking handle.  Service kits are available. It unique self-aligning ball rotates freely against teflon ® seats. Its unique body-to-flange design allows low torque on and off operation. All valves are tested by air pressure under water

Brass ball drip valve is designed to drain water automatically. It closes, however, against an increase in flow pressure and opens automatically at a predetermined decrease in pressure. It is used on the inlet side of fire department check valve or pumper connections to prevent water from collecting and freezing.

Brass gate valve is a valve that opens by lifting a round or rectangular gate/wedge out of the path of the fluid. The main feature of a gate valve is the sealing surfaces between the gate and seats are planar. It is characterized as having either a rising or a non rising stem. Rising stems provide a visual indication of valve position. Non rising stems are used where vertical space is limited or underground. This valve is constructed of brass material.

Brass pressure relief valve is a type of valve used to control or limit the pressure in a system or vessel, which can build up by a process upset, instrument or equipment failure, or fire. It is designed to provide protection from over-pressure in steam, gas, air and liquid lines. It is self-operating valve that is installed in a process system to protect against over pressurization of the system.

Brass Safety Relief Valves are made up of carbon steel, stainless steel, alloy steel and duplex steels. It consist of springs, relieving gears, sensing orifices and viton seals. These are mostly used in oil & gas processing, refinery, chemical, petrochemical and power plant industries.

Brass swing check valve is ideal for the methoxide inlet on biodiesel processors. With a swing valve inside, it keeps the methoxide only flowing one way. The body material of this valve is fully made of brass. It is available as rubber sealing type of metal sealing type.