Catalytic Debinding Ovens offers various sizes of ovens for research, development and production. These are designed for catalytic debinding of BASF polyacetal binder from injection molding of metal and ceramic powders. These are batch debinders offered in four sizes from lab-scale to production level processing.

Ceramic Kiln Furnaces is generally employed as a gaseous fuel and used as a heat source. It is useful and important to replace a part of gaseous propane with an alternative fuel such as PET-resin powder from the view point of energy saving and low environmental impact.

Computational fluid dynamics is a branch of fluid mechanics, which uses numerical methods and algorithms to solve and analyze problems that involve fluid flows. It is an important part of building and analyzing a flow model. It is used to calculate flow parameters in fluids, and for the design and simulation of the behavior of fluidic systems. Computers are used to perform the millions of calculations required to simulate the interaction of fluids and gases with the complex surfaces used in engineering.

Clean Room Ovens are designed for a number of applications, including curing polyamide coatings, moisture drying, baking photo resist coating and various pharmaceutical processes. It can be sealed from the environment to eliminate risk of facility contamination. These are having easily removable Class 100 (M3.5) HEPA filter. These are suitable for inert gas purge to eliminate moisture and vent out contaminants. These are coated with baked on powder-coated white enamel finish that are used as long-lasting corrosion protection. All welded and sealed construction assures continuously low particle counts.

Coil-Type Element Heating Lids are manufactured of heavy-gauge high temperature alloy wire supported on ceramic threaded sleeves. These are more robust and forgiving of hostile environments than the standard tubular style-heating element. The input can be squeezed into the same area with relatively low watt loading per square inch of element resulting in longer element life due to the heavy wire gauge and large coil diameter. The inner lining and sealing surface of the heating lid is constructed of special heat-treated ceramic plates.

Centrifugal fans with electric motor drives are used to supply combustion air. Since the fans for high-velocity air must operate at higher tip speeds and therefore with considerable noise, the fans should be located where their noise will not be a nuisance. Low velocity combustion air can also be admitted through louvers, doors, or other openings as a result of the negative pressure or draft within the furnace chamber. The quantity of combustion air admitted through such openings can be controlled by dampers. Combustion air for suspension burning of shredded and air-classified refuse or other finely divided waste material that does not use grates as the principal site of waste gasification requires a different combustion air concept than that appropriate for a grate system.

A conductivity meter contains a transmitter and a receiver, measures differences in the electrical conductivity of the ground. The transmitter projects a primary electromagnetic field into the ground that generates small eddy currents of the surface of conducting objects (ferrous and non-ferrous) or features, and the eddy currents in turn create a secondary magnetic field that is measured by the receiver.

A continuous catenary furnace is a continuous horizontal furnace most often used for annealing stainless-steel strip. A long, thin load is supported by rollers at the entrance and exit, and therefore hangs in the shape of a catenary curve within the furnace. With a light, thin load such as strip, heating capacity may be in the range of 100 to 300 psf of hearth. As with all furnaces, the authors recommend developing a heating curve for the specific load and using that curve to determine necessary total furnace length.

Continuous Conveyor Belt Kilns are available in wide ranges of length, width, conveyor speeds and temperature zone configuration. The exterior modular construction consisting of heavy gauge steel, welded and reinforced with structural steel members to form integral units. The conveyor materials selected to meet process conditions. The machine have standard linings of energy saving multi-layer ceramic fiber insulation. It has process zone, which are designed to meet specific process requirements for pre-heating, soak, cooling and atmosphere. It carries out continuous heat processing of ceramic, glass or metal materials.

Continuous Process Curing Oven is incorporating various maximum temperatures to accommodate a variety of applications. It consists of state-of-the-art digital controllers, uniform airflow, convenient safety features, and rugged construction. These are used in baking, paint drying, varnish baking, shrink packaging and aging.