Gravity HVLP gun is a good solution for spray finishing needs. It is a general purpose gravity feed spray gun for a wide range of industrial materials and coatings applications. The gun is constructed of high grade aluminum. It is generally supplied with two tips, a 1.5mm already fitted to the gun and 1.8mm for heavier materials. It consists of an electro-polished brass air cap.

Gun fitting pressure tester mainly consists of a gauge assembly for accurate pressure reading at the gun. It is easily snapped on and off the gun for convenience. It has quick detach fittings for fast, easy fitting and removal. It uses the pre-drilled aperture at the base of the gun handle.

Half-mask respirator covers the mouth, nose and chin. The advantage is a more secure fit, and a better sealing capacity allows the respirator to be used where more toxic materials exists. The mask consists of purifying elements such as filters, chemical cartridges or canisters that can be attached directly or by use of a breathing hose, depending on the size and weight. Inhalation and exhalation valves are used to draw the air from the filter and exhale the carbon dioxide air out.

Hard anodization is an electro-chemical process that hardens aluminum. During hard-anodization, aluminum is submerged in an acid bath, and then subjected to electrical charges. The result is a chemical reaction wherein the surface of the aluminum combines with oxygen to become aluminum oxide. Hard anodizing is more commonly found in industrial or commercial applications than in consumer products.

HDPE geomembrane lining material is an ideal material for large applications that require UV and ozone resistance, chemical resistance, or high-quality installations. It is typically used in landfill and mining applications. Generally it is available in various thicknesses ranging from 40 to 120 mil. These materials are very suitable for exposed lining projects.

High pressure fluid heater is used to reduce the viscosity of coating materials and increase operating efficiency without adding solvents. It consists of an electrical enclosure and a high-pressure fluid passage body. A cartridge heater and adjustable thermostat provide accurate fluid temperature control, and a high-temperature limiter ensures maximum operating safety. High pressure fluid heater is designed for high-flow applications, high-solids coatings and other high-viscosity materials, adjustable thermostat makes temperature setting simple and a read-out thermometer provides constant monitoring of fluid temperature. It can be wall mounted or dolly mounted using the integral mounting bracket.

Hot applied coating are generally either filled or non-filled. These are either 100% bitumen or bitumen blended with selected fillers. These are brought to the desired application viscosity by heating. It is a method for forming an adherent protective coating on objects, particularly pipes for burial in the ground where they are subject to corrosion.

Hydrophobic coating is applied to the housing wall in the areas of crevices, chinks, openings and capillaries to prevent moisture. It bonds with the glass to create a barrier against dirt, repelling dust, grease and liquid. The coating is non-acidic. It allows glass to be cleaned with a wiping cloth without cleaning solution. It is a durable water repellant coating that repels water and salt spray. Hydrophobic coating makes water and liquids bead up on the surface.

Impact resistant coating is used to protect aerospace components such as aircraft landing gear, landing gear compartments and under fuselage surfaces. It is designed to resist chipping caused by road debris. It eliminates paint stripping and corrosion.